Industrial plants and factories are the greatest contributors to air pollution. Issues on safety and the health of the environment are one that has gained worldwide attention.
This is a sponsored post by Camfil. The opinions expressed in this article are those of the author.
Without a doubt, the health of our environment is not what it used to, and there are so many threats to it, and the one with the largest effect is the carbon footprint of each individual, company, organization, city, country, and region.
A large contributor to the increasing pollution of the air are factories and industrial plants, the processes that they do in order to manufacture and produce needed materials and products also have byproducts and wastes that finds itself into the air. As such, the clean air act had been signed and passed into law in the national and international arena, and each factory has to comply with the set of safety and environmental regulations.
The most important of which is controlling the amount of dust and other particles that are released into the air through the use of dust collectors. One of the best is the Camfil Brand Dust Collector.
Having an industrial dust collector does not only ensure that your company will be complying with the environment and safety standards but also provide a safe working environment for your employees.
Moreover, it should be the social responsibility of each industrial plant or factory to minimize its carbon footprint and not contribute to the degradation of the quality of the air we breathe. One should also think about global warming, climate change, ozone layer damage and the greenhouse effect, which we all know are aggravated by air pollution.
What is a Camfil Brand Dust Collector?
A Camfil Brand Dust Collector is state of the art and high-efficiency dust and fume collection system that was developed to handle a wide variety of toxic and flammable dusts, fumes and smoke which are heavily laden with combustible dusts. These kinds of dust collectors have been designed to handle a huge number of materials ranging from metals to plastics and other toxic particles with a very low-pressure drop. This would mean that as the air is being processed and cleaned through a number of filters, the air is blown through uniformly into the filters thereby making sure that each particle of dust is collected before the air is released to the environment.
The Camfil Brand Dust Collector has been developed by a company with 20 years of experience in the industry and have been awarded by various organizations for producing high-quality dust collectors with the latest technology.
The Camfil Brand Dust Collector uses the crossflow technology and a unique baffle configuration that ensure that the machine is able to produce uniform airflow. A uniform airflow is important as it would be indicative of high efficiency and savings. Filters are less damaged when it is subjected to uniform airflows and would translate to longer use of the filters and lesser need to change it, extending its usefulness and lowering costs.
The best industrial dust collectors are able to produce results that go beyond OSHA standards for air quality and it is equipped with a Camfil explosion vent to protect the factory and its employees from incidents like explosions.
Moreover, the dust collector meets the quality standards in compliance with NFPA and ATEX policies.
What Are the Key Features of a Camfil Brand Dust Collector?
The Camfil Brand Dust Collectors have been manufactured by a company that has extensive experience in the design, production, and installation of dust collectors for different clients all over the world.
If you are committed to ensuring the safety of your workers and minimizing your impact on the environment, then you need to invest in a dust collector that would provide you the answers to your needs as well as a few extras. However, when looking for the best one, you should base your decisions on the following:
- Modular Design. Camfil Brand Dust Collectors have a modular design, which means that the dust collector had been designed either to be set-up individually or in a group of modules. The dust collector can now be configured into several components and can be altered to fit your working environment. The individual modules can handle airflows to about 6000 CFM and thus can be used in any space in the factory.
Moreover, the implication of a modular design for the factory is that you will be able to get equipment that is perfect for your needs and available space. It is no longer necessary to work with huge equipment and having to change your workspace to accommodate the dust collector.
- More Filters. Camfil Brand Dust Collectors use up to four filter cartridges. The filter cartridges provide that layer of collection and control necessary for keeping the dust and other toxic particles from being released into the air. The individual modules have enclosures that allow for the use of multiple filters, which will produce a higher and finer output but with a low-pressure drop. Multiple filters in each module guarantee that the dusts are efficiently collected and only clean air is being released into the environment.
- Gold Cone X-Flo. Camfil Brand Dust Collectors are designed with a key advanced technology component which is the Gold Cone X-Flo filters in each of the modules. The X-Flo filters had been developed with the highest quality and make sure that the filters you use remain clean, and last longer than most conventional pleated filters. Also, the filter has the Gold Cone which is an open-bottomed inner cone of media that increases the surface area of the filter. The cone allows more air to pass through the filter and therefore catch more dust particles in it.
What are the Procedures Involved in Camfil Brand Dust Collectors?
Just like any other dust collector, the Camfil Brand Dust Collector is designed to do only one thing and that is to clean the air within the factory and control the amount of dust and particles that are released into the air. Thus, air in the factory is suctioned and directed into vents and ducts which contain the cleaning system. The dirty air passes through a number of ducts and at each one, the air that goes by it is cleaned for any pollutants, dusts and particles that are harmful to the environment and the workers in the factory.
This cleaning system reduces the number of dusts and particles that are contained in the air, then it is blown into the air filters which effectively traps the unwanted dust particles. The filters often come in fours, thus the air is cleaned at least four times before it is allowed to escape into the environment.
Additionally, the dust collector effectively manages the collected dusts, either to be reclaimed or to be disposed of. Since Camfil Brand Dust Collectors use crossflow technology and the unique baffle movement, then it can effectively control the amount of dust that is released into the air and helps in extending the life of the air filters.
How Do You Set-up a Camfil Brand Dust Collector?
Setting up a Camfil Brand Dust Collector is quite easy since it comes in individual modules that could either be combined and bolted together or used individually. Each production step has its own processes and therefore will give off dusts and particles depending on the materials used in that step.
The modular set-up is very useful since it can be configured in a number of ways to suit the space and needs of the factory. You only need to determine how much airflow power is needed in the said area and the appropriate number of modules will be placed in that area.
Why Is Camfil Brand Dust Collector the Best Choice?
Camfil Brand Dust Collectors are like the gold standard when it comes to dust collectors, it is customizable and can, therefore, handle any factory or industrial plant ranging from the smallest and start-up ones and even the multimillion-dollar industrial plants.
It is the best choice as it can handle a huge number of materials efficiently and this is not even limited to metals, plastics, pharmaceuticals, mining, food, and beverage. As such, each material requires a different process and can produce toxic wastes. The Camfil Brand Dust Collectors ensure that the air within and outside the factories are safe, clean and healthy.
How to Maintain A Camfil Brand Dust Collector?
Controlling the amount of dust and particles released to the environment is the most difficult to attain especially in industrial processing and manufacturing. However, having a Camfil Brand Dust Collector is enough to ensure that the workplace is safe and the factory is not contributing to the pollution of the environment.
On the other hand, if the dust collectors are not operated properly and maintained excellently, it may also lead to accidents and even to the loss of life. Therefore, the dust collector system should only be managed by competent and trained workers as the safety and health of the plant, the workers and the community is at stake.
Additional Post You Might Like: